Setting Parameters For Individual Fittings - Schell 00 503 00 99 Manual Para La Puesta En Servicio Y La Configuración

Confi uration of t e e C

Setting parameters for individual fittings

ettin parameters for individual fittin s
Essentially, the same settings are underta en under parameter settings as
those that can be programmed manually on the fitting as
Ho ever, for various fittings, some e tended functions can only be set via the
eSCHELL soft are (observe the assembly manual for the respective fitting).
Under the Manual Programming (On/Off) parameter, you can set
manual programming is possible directly on the fitting or not.
There are t o possible ays of setting the parameters of the individual fittings
in the eSCHELL soft are.
1. Parameter setting via the device list
2. Setting via the room layout
arameter settin via t e device list
Path: Devices — All Devices — Faucet
The devices/fittings of the eSCHELL
the All Devices submenu.
» Clic on an entry in the list to access the follo ing information and setting
options for the corresponding fitting:
– Information
– Modules
– Confi uration
– Diagnosis
» Choose the Configuration menu item to set the parameters of the fitting.
LL ater mana ement server
ell.
— Configuration
ater management system are sho n in
Fig 28: Parameter setting via the device list
hether
169
EN