Using Your Iron - GE 106822 Guia De Inicio Rapido

840099800 Ev02 4/9/02

Using Your Iron

To Dry Iron
1. Plug iron into outlet.
2. Set the Adjustable Steam Switch
To Steam Iron
1. Unplug iron. Using a cup, slowly
Opening
2. Plug iron into outlet.
3. Turn the Temperature Control Dial
4
2:05 PM Page 4
3. Turn Temperature Control Dial
to 0 (the Dry
Iron position).
4. To turn iron Off, turn Temperature
Control Dial to Off ( O ) and unplug
iron.
4. Allow two minutes for the iron to
pour 6 ounces
reach desired temperature.
( 3 ⁄ cup) of tap
4
5. To turn iron off, set Adjustable Steam
water into water
Switch to 0 (Dry Iron). Turn the
tank opening.
Temperature Control Dial to Off
Do not fill iron
( O ). Unplug iron.
directly from
6. Empty water from the iron following
the faucet.
directions in "Caring for Your Iron."
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
to desired fabric
between tap water and distilled water
setting in the
for use in the iron.
steam range. Set
the Adjustable
Steam Switch to
the recommended
steam level. See
"Fabric Setting
Chart" on page 5.
to desired
temperature.
Allow two
minutes for iron
to reach desired
temperature.