Clean / Replace Filters; How To Clean Sensor - Predator PUR100 Instrucciones De Uso

FILTER REPLACEMENT REMINDER
The fi lter icon fl ashes to indicate that the fi lter needs to be replaced, as shown in the fi gure

Clean / Replace Filters

Please follow the instructions below
As shown in diagram A below: hold the two sides of the unit, pull out the front panel and lift it.
As shown in diagram C: pull down the strap on the fi lter to take out HEPA activated carbon fi lter. As shown in diagram.
Please hold the middle of the front panel with both hands to install it as shown in diagram D.

HOW TO CLEAN SENSOR

Please unplug the air purifi er before cleaning.
-Open the dust cover on the back of the air purifi er and use a clean soft cloth to clean the sensor.
-Never use water, alcohol, gasoline, benzene and any other liquid to clean the sensor. Otherwise, it would cause
damage to the sensor.
www.glaziar.com / info@glaziar.com
17