Cequent Performance Products 65070 Instrucciones De Instalación página 6

5. Raise the center section of the hitch into position between the side brackets
and loosely attach using the 1.25" carriage bolts and lock washers and hex nuts
as shown.
7. First tighten center section to side plates, then tighten the strap to the
bumper beam, then tighten the side plates to the frame.
Tighten all 1/2" fasteners with torque wrench to 75Lb.-Ft. (102N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
6. Attach the straps on the center section to the 1.50" carriage bolts that were
installed in step 3.
8. Reinstall the skid shield that was removed in step 1.
Sheet 6 of 15 65070NP 2-8-16 Rev. C