Cequent Performance Products 65072 Instrucciones De Instalación página 4

1. Remove Air Dam – Remove 8 bolts and 2 corner screws from the air dam.
3. Trim Air Dam – With a utility knife, cut out a 1.50" x 0.375" rectangle at
1.438" away from the inside horizontal edge on each side, shown in Figure 2.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
2. Remove Tow Hooks – If present, remove 2 bolts from each tow hook. Keep Tow
Hooks for re-installation. Return fasteners to owners.
4. Reinstall the Air Dam – If trimmed, reverse step 1; replace 8 bolts and 2
corner screws from the air dam.
Sheet 4 of 15 65072NP 3-29-16 Rev. A