Cequent Performance Products 65072 Instrucciones De Instalación página 5

5. Raise Hitch into Position
a. Without Tow Hooks – Tape 1 Flat Washer above rear hole of each side
of Hitch. Raise Hitch into Position.
b. With Tow Hooks – Tape 1 Flat Washer above rear hole of each side of
Hitch. Tape 1 Flat Washer to Top Side* forward hole of each Tow Hook. Raise
hitch into position.
7. Tighten all M12 CL10.9 fasteners with torque wrench to 130 Lb.-Ft. (176 N*M).
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
6. Install Fasteners – Secure each side of Hitch with 2 Bolts and 2 Conical Washers into
weldnuts in frame.
Sheet 5 of 15 65072NP 3-29-16 Rev. A