EAS ELECTRIC EMD14X-V1 Manual De Instrucciones página 78

Problem
The
dishes
are not
clean.
Cloudiness
on
glassware.
White spots
appear on
dishes and
glasses.
Black or grey
marks on
dishes
Detergent
left in
dispenser
The
dishes
aren't
drying
Possible Causes
Not enough detergent
was dispensed.
Items are blocking
the movement of
the spray arms.
The filter
combination
is not clean or is not
correctly fitted in
the base of wash
cabinet. This may
cause the spray arm
jets to get blocked.
Combination of
soft water and
too much
detergent.
Hard water area
can cause
limescale deposits.
Aluminium utensils
have rubbed
against dishes
Dishes block
detergent
dispenser
Improper loading
Dishes are
removed
too soon
What To Do
Use more detergent, or
change your detergent.
Rearrange the items so that the
spray can rotate freely.
Clean and/or fit the filter
correctly. Clean the spray
arm jets.
Use less detergent if you have
soft water and select a shorter
cycle to wash the glassware
and to get them clean.
Add more detergent.
Use a mild abrasive
cleaner to eliminate
those marks.
Re-loading the
dishes properly.
Load the dishwasher as
suggested in the
directions.
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can come out. Take out the dishes
until the inside temperature is safe
to touch. Unload the lower basket
first to prevent the dropping water
from the upper basket.
28 V.2