Breezair ICON Serie Manual De Instrucciones Y Propietario página 10

PRE-SEASON SERVICE
•Turn off the main power supply to the air
cooler
•Remove the pad frames as shown.
•Ensure the power switch in the cooler is
off.
•Gently wash the pads to remove any
dust build up during the winter
period. If the pads are in poor
condition, replace them.
IMPORTANT! Do not damage the
pads with high pressure water
spray.
•Turn on the power switch inside the
cooler.
•Turn on the water and then the main
power.
•Re-fit the pad frames and run the cooler.
WARNING! Do not run the air
cooler with the pad frames
removed.
REMOVAL OF PAD FRAMES
To remove a pad frame, insert a flat screw
driver tip into the slot as shown and lever
until disengagement occurs.
Take hold of the pad frame and pull it
towards you until the internal side clips
disengage.
Pivot the pad frame outwards and lift up.
Take care not to damage the pad. Repeat
these steps for the remaining pad frames.
®
9
MAINTENANCE
9