Breezair ICON Serie Manual De Instrucciones Y Propietario página 4

3
®
WALL CONTROL FUNCTION
STARTING YOUR COOLER
The button turns the air cooler
on and off.
There are two modes of operation to
choose from, Automatic mode or Manual
mode. When the air cooler is turned on, it
will start in the mode of operation it was in
when last turned off.
If your air cooler has been off for more
than (about) 10 minutes, then when you
start it, "Preparing to Start" may flash on
the display as shown. This shows that the
water pump will operate to saturate the
cooling pads for a few minutes, before
the fan is turned on. This ensures that
when the fan starts, only cool air enters
the building.
ILL1122-B
3