Using The Cooler - Breezair ICON Serie Manual De Instrucciones Y Propietario

USING THE COOLER

Now that you have read these
instructions, press the
turn your air cooler on. If the air cooler
has not operated for a while , "Preparing
to Start" will flash on the display (see
page 3). The pre cool cycle will begin and
will take only a few minutes to complete.
After this time, the fan will start
automatically, and you can enjoy the
comfort of cool fresh air!
®
WALL CONTROL FUNCTION
With the cooler running in Automatic
button to mode, you may find that you are too cold
or that the air cooler is blowing too much
air. Press
of cooling.
If you are too cold with the cooler running
in Manual mode, then press
reduce the fan speed. You can also
circulate fresh uncooled air by pressing
AIR NOT COLD ENOUGH
You may find that with the air cooler
running in Automatic mode, you are not
cool enough. Simply press
increase cooling.
If you are not cool enough with the air
cooler running in Manual mode, then
press
Ensure that cooled air is circulating by
pressing
You can experiment with the
settings on your wall control. This
is the best way to decide what
suits your needs.
6
AIR TOO COLD
. to reduce the amount
until "Vent" displays.
to increase the fan speed.
until "Cool" displays.
6
to
to