Maintenance - Cata Nonvirair Purifyer PRO Instrucciones Para La Instalación, El Uso, El Mantenimiento

6 60 minutes – final ventilation process.
NOTE: This process can be carried out in the presence of people and
animals.
NOTE: To cancel this process, press any other filtration mode or the
sterilisation icon or ON/OFF to enter standby mode.

MAINTENANCE

Initial instructions before carrying out maintenance.
IMPORTANT
• Before carrying out any maintenance operation, stop the appliance
and unplug it.
• The maintenance operations the user is permitted to carry out are
limited to filter changes.
• Never submerge the appliance in water or other liquids.
• Do not use abrasive, aggressive or inflammable cleaning products to
clean any part of the appliance.
Filter cleaning and replacement
Filter
PRE-FILTER
ACTIVATED CARBON
FILTER
HEPA FILTER
NONVIRAIR®
STERILISATION CELL
PARTICULATE (PM)
SENSOR
*The cycles in the table are approximate and depend on the operating hours and
level of contamination of the installation location.
Maintenance
method
Clean
-
Rotate filter po-
sition
Filter replacement
-
Clean
Replacement time *
A warning is issued (see p. 57)
Cycle of approximately 4
weeks*
-
A warning is issued (see p. 59)
Cycle of approximately 6-12
months*
A warning is issued (see p. 59)
Cycle of approximately 1-2
years*
-
A warning is issued (see p. 62)
Spare part
code
02894009
-
-
02894011
-
-
57