Changing A Programme; Cancelling A Programme - EAS ELECTRIC EMD14AZDX Manual De Instrucciones

13. Energy Save Option Indicator
Select the Energy Save option to enable the
door of the machine to open at the end of
the programme to increase drying efici-
ency. This function also saves energy by
operating at a lower temperature.
14. Extra Fast Option Indicator
Select the Extra Fast option to decrease the
duration of a programme, providing more
economical water usage.
15. Extra Silent Option Indicator
Select the Extra Silent option for a more
sensitive and silent washing operation. This
option reduces the sound pressure level of
the washing.
16. Washing Cycle Progress Indicators
The display will show the symbols corres-
ponding to the status of the programme in
operation. While the Drying symbol is on,
the machine will remain silent with respect
to the programme you have selected for 15
to 100 minutes.
NOTE: If an extra option has been
used on the most recent wash programme,
this option will remain active on the newly
selected programme until the machine
turns of. To cancel this option on the newly
selected wash programme, press the Op-
tion button (6) until the light on the button
switches of.
NOTE: Child lock is activated/deacti-
vated by pressing the select button (7) for
about 3 seconds. When it is activated, all
leds blink and "CL" is shown on the Remai-
ning time indicator (4).
NOTE:To save any program as favou-
rite program, press Program (2) and Delay
(3) buttons simultaneously. To select favou-
rite program, press Program (2) button for 3
seconds.

7.1. Changing a programme

If you would like to change the programme
when the machine is already running.
After the programme stops, select
your desired programme via the
programme selection button.

7.2. Cancelling a programme

If you would like to cancel a programme
when it is running.
When the End light turns on,
switch your machine off by
pressing the On/Off button.
EN - 20
Press the Start/
Pause button.
Start the newly selected programme
by pressing the Start/Pause button.
The new programme will resume
the course of the old programme.
Press the Start/Pause
button for 3 seconds.
During cancellation, the
End light blinks.
The machine discharges the water
inside it in about 30 seconds.
V.1