Trimmer Guard; To Assemble The Trimmer Guard; Battery Housing Wear Guard - RedMax BTR250PL Manual De Taller

5.13 Trimmer guard

5.13.1 To disassemble the trimmer guard
1. Loosen the screw (A) and unhook the trimmer guard
from is attachment (B).
2. Loosen the screw (C) in order to remove the trimmer
guard fitting.
C
572 - 001 - 28.03.2018
A
B

5.13.2 To assemble the trimmer guard

1. Screw in screw (C) holding the trimmer guard fitting.
C
2. Hook on the trimmer guard to the attachment (B)
and secure it with the screw (A).

5.14 Battery housing wear guard

5.14.1 To disassemble and assemble the battery
housing wear guard
1. Remove the 6 screws and lift off the wear guard.
A
B
Repair instructions - 13