Pilote P600P 2021 Manual De Instrucciones página 109

Raised position
• Stow the ladder
• Ensure there are no people or objects on the bed.
• Raise the bed
• Fasten the retaining strap
• Return driver and passenger seat backs to correct position
Low-profile Motorhomes
Pull-down bed deployment settings are applied in the factory. The pull-down bed guide settings are not lost in the event of a power cut. The
vehicle must be secured in a horizontal position for the bed to work properly.
If the pull-down bed ceases to operate electrically, check the battery voltage and fuses, and that 'AUX' is selected on the control panel. If the
problem persists, contact your dealer. Maximum load for the cupboards under the bed is 5kg per cupboard to prevent electrical overload or
other system malfunction.
Maximum permissible load in the cupboards: 5 kg per cupboard.
Sleeping position
• Tip the bench cushions forward and lower or remove the headrests.
• Turn on the auxiliary mode on the control panel
• Press the "lower" button
lowered position.
• Once the bed has been lowered, install the ladder before climbing onto the bed.
on the control unit and allow the bed to descend into the
108