Cequent Performance Products 36601 Instrucciones De Instalación página 5

4. Install hitch: Raise the hitch above exhaust, feed pull wires ⑤ through the attachment points on hitch brackets. (Gently pull fascia rearward as needed to gain access
between the fascia and exhaust hanger.)
5. Install fastener: Using the conical washer ③ to hold the bolt in
place remove the pull wires ⑤ and attach the hex nut ④. Hand
tighten both sides.
©2017 Cequent™ Performance Products, Inc. -
6. Tighten all 1/2 GR5 fasteners to 75 lb-ft. (102 N*M) Note : A universal joint socket may be
needed to tighten the rearward fasteners on both sides.
Printed in Mexico
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 5 of 18 36601NP 3-10-17 Rev. A