Cequent Performance Products 76018 Instrucciones De Instalación página 6

9. Install hitch - Raise hitch into postion over the lower bumper studs, guide the
fishwire ends through the forward attachment holes, install (2) nuts onto lower
bumper studs, remove pullwires and install the conical washer (teeth side toward
hitch) and ½" hex nut onto the carriage bolts at the forward attachment.
11. Reinstall fascia and exhaust hangers – Reinstall all exhaust hangers, tighten
sensor bar, reinstall the trimmed heat shield, reinstall the lower fascia.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
10. Tighten all hitch fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 6 of 18 76018NP 3-1-16 Rev. A