Infiniton GWA-11NP Manual De Usuario página 35

retardant rubber pipe, fasten the joints with clips.
After connecting the pipes, please check the connection with soapsuds for gas
leakage.
 Water Inlet
A water valve shall be installed before the water inlet (Fig.6). Rigid pipe that is
pressure resistant and temperature endurable is recommended, but in any case
never use plastic or aluminum pipe.
Note: There is a filter inside the water inlet connector, please do not remove it.
THE APPLIANCE MUST NOT BE PUT IN FUNCTION WITHOUT FILTER.
 Hot Water Outlet
If connecting the hot water outlet directly to the shower, flexible pipe can be
used. In case outlet pipe is connected with water valve or faucet, please use rigid
pipe that is pressure resistant and temperature endurable. But in any case never
use plastic or aluminum pipe.
Attention: It's recommended not to use water mixing valve, working under
long-term high thermo-load or small water flow in the appliance would reduce
lifetime and impact the performance.
3. Battery Installation
Do not confuse the positive and negative poles of the batteries (See Fig.7 &
Fig.14).
Page 9