Diamond ASD/50 Manual Del Usuario página 10

Improper installation may damage the dryer machine. Pleased
note the following during initial installation and whenever the
dryer machine is moved.
Place the box on a plane surface and with the arrow of the
box always pointing out up.
Cut the external strips. Open the inferior part where it is
leaning the machine and take out the cardboard container
throwing up.
INSPECT THE MACHINE FOR POSSIBLE DAMAGES IN THE
TRANSPORT OR UNDUE HANDLING. If it was necessary present a
reclamation 24 hour before immediately to the transport company.
Retire the poli styrene pieces that are protecting to the
machine.
One carried out this operations, proceed to check that all the
elements of the machine is in the correct position, according
to the "Part name" section.
FIG.
INSTALLATION
1.- UNPACKING
2.- POSITIONING
For assuring a good operation, place the
machine in a completely plane place.
Once located machine, uncoil the two
back screw such a form that the front
axles have a slight inclination down.
(FIG. 0)
Don't Displace machine
working.
0
when this
9