Diamond ASD/50 Manual Del Usuario página 15

Before start working, read carefully these indications:
Once the operation of installation and electrical connection are
carried out, the machine is prepared for use.
* Place each the plastic cubes in the laterals and a recipient
(glass, jar,...) in the base for glasses.
* Make sure that master switch is in OFF position. If it is the F-
50-A model, check that the feeder switch is also off. Connect
the plug of machine to the electrical net (FIG.2)
* Make sure that the cover is closed.
* Push ON switch . Machine will begin to work immediately. If it
is the model F-50-A press the feeder switch before the main
switch so that the machine begins to work.
* Place the citric fruits in the feeding ramp or feeder.(FIG.3)
The machines are prepared to squeeze, oranges, lemons,
limes, mandarins and grapefruits, provided you are respecting
the dimensions of recommended diameter in each models.
RECOMMENDED DIAMETER OF THE CITRIC FRUIT
MODEL F-50
MODEL F-50-A
USE
1) OPERATION
All the size to 85 mm
All the size to 80 mm
14