To Recharge The Battery - Dogtra YS300 Manual Del Propietário

TO RECHARGE THE BATTERY

1. Open the Battery Charging Receptacle & Rubber Plug on the
Anti-Bark Collar and connect the Lithium Polymer Charger to
the battery-charging receptacle as shown in the diagram.
2. Plug the Lithium Polymer Charger into an electrical power
outlet of ordinary household voltage (220V).
3. Li-Polymer Battery provides a 2-hour rapid charge.
4. When the battery is recharging, the LED will stay on red. The
LED light will become green when the battery is completely
recharged (The battery is fully charged with a 2-3 hours
charge.).
42
220V / 5V 0.1A
Charger
Wall Outlet
Battery life
Charging
On charging
Indicator Light
Stays on red
(LED Window)
IMPORTANT : Only use the Dogtra approved Lithium Polymer
Battery Charger that is designed for the YS300. The use of the
wrong charger can damage the unit.
Charger Info
Manufacturer : HON-KWANG
Manufacturing country : CHINA
Model name : HK-AP-050A100-EU
INPUT : 100~240V~50/60Hz 0.2A /
OUTPUT : 5V 1.0A
WARNING
!
During battery charging, the unit must be close to the wall
outlet and the wall outlet must be easily accessible for
security reasons.
Completely
recharged
Stays on green
43