Shark Explore-R Manual Del Usuario página 18

legal informations: this helmet was specifically designed for
motorcycle use. It is not to be subjected to any technical modifica-
tion. In order to offer an adequate level of protection, this helmet has
to be properly adjusted and securely fitted. Any helmet which has
been subjected to a severe impact must be replaced.
Caution: Do not apply any paint, stickers, petrol or any other
solvent to this helmet. Only the visors SHARK VZ120 appro-
ved under No. 050 153 and the goggles approved under No
VZ 7400 NF EN 1938 2010 must be used with this helmet.
This visor is made of injected polycarbonate.To keep the good
optical quality of the visor and the coatings do not use any
solvent, petrol, abrasive paste or similar products for cleaning.
We advise to use a soft rag with cool water and mild soap. Visors
printed "DAYTIME USE ONLY" must not be used at night or in poor
visibility conditions.
"This user's manual and its images can not be considered as
contractual. SHARK reserves the right to improve the quality of
production. The images contained in this document are SHARK's
exclusive property. Any reproduction is forbidden".
SHARK - ZAC de la Valentine
110, route de la Valentine
13396 MARSEILLE
Cedex 11 FRANCE
Tél. : +33 (0)4 91 18 23 23
Fax : +33 (0)4 91 35 29 23
contact@shark-helmets.com
www.shark-helmets.com