Sun Visor; The Sun Shield - Shark Explore-R Manual Del Usuario

The EXPLORE-R SHARK is equipped with
an Integral sun shield with external controls.
Warning: this sun shield can be used only in
bright glare and when you are not riding in an
area in which you risk having a sudden change
in visibility (a tunnel, for example). In all situa-
tions of reduced visibility, at the beginning or
end of the day, at night, when it is raining or fo-
ggy, etc. the sun shield must be kept in the high
position so that your vision is not impaired. The
lateral lever operates the sun shield. To use the
sun shield, just lower this lever (A).
A
REmOVAl (A)
- Move the sun shield to the lower position.
- Pull the sun shield delicately downward.
- Pull the sun shield forward, one side at a
time, to unclip it from the mounting points in
the helmet.
To ensure its protection and lengthen its li-
fespan, the external surface of the EXPLORE-R
sun shield has been coated with an an-
ti-scratch treatment. To maintain and clean it,
please follow the same instructions as for the
external surface of the visor.
Warning: if your visor and/or sun shield no
longer provide you with excellent visibility after
a period of service, it is absolutely essential for
you to replace them. We advise you always to
ride with perfect visibility. NEVER ride with the
sun shield as eye protection. You must always
ride with the visor in the lowered position.
B
REPlACEmENT (b)
- Move the handling button to the low position.
- Push, at one side at a time, the sun shield
forward to clip it onto the mounting points in
the helmet.
- And then clip the sun shield back on by lifting
it slightly.

SuN VISOR

11