Programming Of Code "B" In Bistable Mode - Bticino Terraneo Instrucciones De Empleo

i) Press key (indicates the end of the programming
*
sequence)
The programming sequence for code "A" in bistable mode
is thus as follows:
A B C D E F G H I
MMMM 1 AAAAA 00 K
** * *

Programming of code "B" in bistable mode

(always 5 digits)
a) Type in (indicates that a previous code will be changed)
* *
b) Type in the "MASTER" code
c) Press key (indicates programming of an access code)
*
d) Press key 2 (indicates programming of access code for
output B)
e) Press the keys (only digits) of the desired code (5 digits)
f) Press key (indicates the end of access code)
g) Type in 00 (indicates the bistable operating mode)
h) Press the key corresponding to the desired type of
activation and visible indication:
-0- 2-digit activation. LED turned on for the entire activation
time
-1- 5-digit activation. LED turned on for the entire activation
time
-2- 2-digit activation. LED turned on for 10 s
-3- 5-digit activation. LED turned on for 10 s
75