Operation; Connecting Power; Care And Cleaning; Operating The Pump - Everbilt ESE50W-HD Guía De Uso Y Cuidado

Operation

1

Connecting power

□
Plug the pump power cord plug into the piggyback switch
plug outlet.
□
Plug the switch plug into a 115V GFCI power outlet.
□
Allow pump to operate through several on-off cycles.

Care and Cleaning

To clear a pump that is clogged with debris:
□
Unplug the pump to disconnect the electrical power.
□
Unscrew the bolts (4) on the pump body and
remove the volute (1) and O-ring (2).
□
Remove debris from around the impeller (3).
□
Reassemble the pump.
NOTICE:
This pump features an oil filled motor for efficient cooling. The oil also
serves to permanently lubricate the bearings. DO NOT disassemble the
pump body as oil will leak out and warranty will be void.
2

Operating the pump

□
When the float switch (1) moves up over the top of the
pump, the pump begins to operate. When the water lowers
to a certain level, the float switch (1) will turn the pump off.
NOTE: Ensure the pump is submerged in water. Running the
pump dry can damage the pump.
7
Please contact 1-844-883-1872 for further assistance.
1
HOMEDEPOT.COM