KTM Power Parts 76012992044 Instrucciones Para El Montaje página 6

10
X
3
3
7
11
2
2
12
5
9
6
- Mount the GPS navigator (available as an option) on the GPS navigator
mounting plate (3) (included) using the bushings 4.2x8x15.25 (7) (included),
oval head screws M4x30 (11) (included) and nuts DIN985 M4 (10)
(included).
NOTE:
The washers (13) (included) are used to adjust the screw protrusion distance
(X) (after the navigation device is mounted on the GPS navigator mounting
plate). The screw protrusion distance (X) must not exceed 1 mm. If the dis-
tance is greater, correct it by adding washers (13).
- Insert the GPS navigator mounting plate (3) in the GPS navigator bracket
(1).
- The GPS navigator bracket cap (2) (included) can be stored in front of the
GPS navigator bracket when not in use.
- When the navigation device is not in use, the GPS navigator bracket cap
(2) can be mounted on the top.
11
13
7
3
10
1
8
4
2