Setting The Am Tuning Step (Am Step); Setting The Warning Tone (Warn) - Pioneer Super Tuner III DEH-P5250 Manual De Operación

Setting the AM Tuning Step (AM STEP)

The tuning step employed in the tuner's AM band can be switched between 9 kHz and
10 kHz per step. Reset the tuning step from 9 kHz (the factory preset step) to 10 kHz when
using the tuner in North, Central or South America.
Specifications
Tuning Steps
Frequency range
1. Press the FUNCTION button and select the AM Tuning Step mode
(AM STEP) in the Initial Setting Menu.
2. Select the desired tuning step
with the 2/3 buttons.

Setting the Warning Tone (WARN)

You can switch the Warning Tone function ON/OFF. (Refer to "Warning Tone" on page
35.)
1. Press the FUNCTION button and select the Warning Tone mode (WARN)
in the Initial Setting Menu.
2. Switch the Warning Tone
ON/OFF with the 5/∞ but-
tons.
All manuals and user guides at all-guides.com
Initial Setting
9 kHz
531 – 1,602 kHz
New Setting
10 kHz
530 – 1,640 kHz
38