Declaration Of Conformity - Kemper Filter-Table Manual Del Usuario

J. Declaration of conformity
European Community Declaration of Conformity
According to the European community machine standard 2006/95/EG
The manufacturer:
confi rms that the following machines (or building group, machine part etc.):
Description; Name:
Part-No.:
corresponds to the following relevant regulations:
98/37/EWG
89/336/EWG
73/23/EWG
93/68/EWG
Applicable harmonized standards, especially:
EN 292 part 1 and part 2, EN 294,
EN 349, EN418, EN 983
EN 1050
EN 60204 -1:1998-10
EMVG
Part 2 of EN 50081
Part 2 of EN 50082
Applicable national and technical specifi cation, especially:
VDE 0100
VDE 0113
UVV BGV A1
BGR 500 2.26
DIN 45635
This explanation loses its validity, if a change not co-ordinated with the manufacturer in written form is made.
Vreden, 17.01.2007
KEMPER GmbH KEMPER GmbH
Dipl.-Ing.M. Könning
(Chief Technical Engineer)
20
KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
KEMPER Filter-Table
950 400 001 - 950 400 002
Machine safety guideline
EMV - Guideline
Low-voltage - guideline
Marking - guideline
Security of machines
Security of machines - guiding
principles for risk evaluation
Electrical equipment of machines
Law referring to the electromagnetic
compatibility of machines
Specialized basic standard breakdown
Specialized basic standard noise immunity
construction of low-voltage plants
Electrical equipment of machines –
complies to EN 60204-1:1998-10
Regulations for the prevention of accidents:
Principles of prevention
Weld, cuts and related procedures
Noise levels at machines