Declaration Of Conformity - Kemper ProfiMaster Manual De Uso

9.3 Declaration of conformity

Within the meaning of Directive 2006/42/EC on Machinery
Manufacturer:
Mr. Manfred Könning is authorized to compile the technical documents.
We hereby declare that the following machine is in conformity with the relevant provisions of European Directive
2006/42/EC on Machinery.
Serial No.
Designation:
This machine is also in accordance with the relevant provisions of the following EC Directives:
2006/42/EC
2004/108/EC
2006/95/EC
93/68/EEC
The following harmonized standards (or parts thereof) were applied:
EN ISO 12100 Part 1+2, EN 294,
EN 349, EN418, EN 983
EN 1050
EN 60204 -1
EMVG
EN 610000-6 Part 3
EN 610000-6 Part 2
The following technical specifications (or parts of these standards) were applied:
VDE 0100
VDE 0113
60204-1
UVV BGV A1
BGR 500 2.26
DIN 45635
Annex No. VIII to the Directive 2006/42/EC was observed. Compliance with the requirements under the
Directive on electrical equipment designed for use within certain voltage limits was ensured according to Annex
I, No. 1.5.1 of Directive 2006/42/EC.
Additional information:
Declaration of Conformity expires in the event of use contrary to the intended purpose or in the event of
implementation of structural changes that have not been confirmed by us as the manufacturer.
Vreden, 05. 05. 2015
KEMPER GmbH
Dipl.-Ing. M. Könning
(Head of Technical Department)
Product number: 150 2464
Technical changes and errors reserved.
KEMPER ProfiMaster Instruction Manual - EN
KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
60 650 (in case of different serial number in different versions of the device)
KEMPER ProfiMaster IFA
KEMPER ProfiMaster
Machinery Directive
Electromagnetic Compatibility
Directive on Electrical Equipment Designed for Use Within
Certain Voltage Limits
Directive on the Use of the CE Conformity Marking
Safety of Machinery
Safety of Machinery - Principles for Risk Assessment
Electrical Equipment of Machines
The Act on Electromagnetic Compatibility of Machinery
Basic Professional Standards for Emitted Interference
Basic Professional Standards for Interference Resistance
Establishment of Low Voltage Equipment
Electrical Equipment of Machines - Glossary to Standard EN
Accident Prevention Regulation: Principles of prevention
Welding, Cutting and Related Methods
Noise Measurement on Machinery
- 70 - rev.: 2
Status as of: 05/2015