Cequent Performance Products 24928 Instrucciones De Instalación página 4

1. Remove (2) 8mm bolts from the rearward hanger bracket on both sides
of the vehicle and (2) 8mm bolts from forward hanger brackets.
3. Unhook the (4) hanger brackets to lower exhaust and support the exhaust
with a ratchet strap.
©2015 Cequent™ Performance Products, Inc. - Printed in Mexico
2. For convertibles, take off the support member by removing (14) 10mm bolts
to get access to the forward hanger brackets.
4. Fishwire 7/16" carriage bolts and spacers through the access hole and
out the two bottom and one side mounting holes in the frame rail, leave
fishwires attached.
Sheet 4 of 15 24928NP 9-29-15 Rev. D