Replacing The Filter Elements En - Binzel Abicor xFUME VAC FLEX Instructivo De Servicio

9 Maintenance and cleaning
9.2 Replacing the filter elements
If there is insufficient suction force, the filter elements must be replaced.
4)
Fig. 6 Replacing filter elements
1 Use the On/Off switch (4) to switch off the extraction system.
 Fig. 5 on page EN-14
2 Pull out the mains plug (no Fig.).
3 Open the service door (no Fig.).
4 Remove the main filter cartridge.
5 The filter elements, which consist of a main filter cartridge, a pre-filter and a spring (no Fig.).
6 Remove the spring and pre-filter.
7 Dispose of the filter elements in accordance with local regulations, (no Fig.)
 12 Disposal on page EN-19
8 Insert a new pre-filter and a new spring.
9 Insert a new main filter cartridge.
10Close the service doors and lock them using the square wrenches (no Fig.).
EN - 16
6)
xFUME VAC FLEX
BAL.0733.0 • 2019-09-18