General Information; Connections And Control Features; Standby Mode - HK Audio PREMIUM PR:O MOVE 8 Manual De Instrucciones

MOVE 8 1.1

1 General Information

1.1 Unpacking and Inventorying
When you fi rst unpack your MOVE 8, take a quick inventory to make sure
the package comes complete with all the contents. A power supply unit,
two batteries are included.
1.2 Powering Up
With the External Power Supply Unit
First connect the external power supply unit to the DC In socket
rear of the MOVE 8, and then connect the mains cord to a power outlet.
●
21
Press the Power button to switch on the device. The green Power LED
lights up; the device is now ready to operate.
For the First Time with Batteries
Heads up: Be sure to charge both batteries fully before using them for
the fi rst time.
To do this, unfasten the wing screw on the rear battery compartment by
turning it counterclockwise. Remove the cover. Slide the two included
batteries into the compartment, pins fi rst in the direction indicated by the
shape of the housings until you feel them click fi rmly into place. Close the
cover of the battery compartment again.
The two batteries will start charging as soon as you connect MOVE 8 to
a power supply. This is done successively. The battery in slot A is charged
fi rst; the battery in slot B comes second. See section 3, Operating MOVE
8 on Battery Power, for more on this. The control LEDs for the two battery
compartments progressively indicate the state of charge until both
batteries are fully charged. Then the two LEDs light up green continuously.
MOVE 8 immediately switches over to battery-operated mode when the
power supply unit is disconnected. One of the two control LEDs on the
battery compartment will fl ash slowly to indicate which battery is currently
in use.

Standby Mode

MOVE 8 features a Standby function that triggers automatically, switching
the MOVE 8 off if it is left to idle for 20 minutes without receiving a signal
or having a device connected via Bluetooth. You can adjust the time until
standby activates in the app from 20 to 60 or 120 minutes or deactivate this
feature altogether. However, auto-standby does save energy if the device is
left on or switched on by mistake, which is very handy when it is running on
battery power.
Press the Power button to switch Standby mode off and the system on.
4

2 Connections and Control Features

2
5
●
20
on the
2
5
6
7
10
13
1
Input
Mic / Line
1
Volume Treble
3
Reverb Bass
4
1
Input
Mic / Line
2
Volume Treble
3
Reverb Bass
4
Input
Guitar Cab
Simulation
3
11
Instrument
Volume Treble
8
Reverb Bass
9
4
Volume
Pairing
12
BT / Aux In
Master
14