Cequent Performance Products 76104 Instrucciones De Instalación página 5

Mopar off road bumper installation:
Lower muffler – If required.
1.
Mopar off road bumper installation:
3. Raise hitch into position – raise hitch onto the vehicle cross member
and align holes in hitch with existing holes in cross member.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
Mopar off road bumper installation:
2. Remove factory bolts and spacer plate – remove (4) M12 flange
head bolts from forward side of vehicle cross member. Remove the
spacer plate located between the vehicle cross member and the Mopar
bumper. Return spacer plate to vehicle owner.
Spacer Plate
Mopar off road bumper installation:
4. Install fasteners – reinstall (4) factory M12 flange head bolts
through hitch and cross member and into existing weldnuts in Mopar
bumper.
Sheet 5 of 18 76104NP 8-25-16 Rev. A