Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Cequent
Performance Products, Inc.
www.cequentgroup.com
Technical Assistance: 800- 632- 3290
TechnicalSupport@cequentgroup.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
6000 lb. (2724 kg)
Weight Distributing
10,000 lb. (4540 kg)
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2017 Cequent™ Performance Products, Inc. -
Installation Instructions
PART NUMBERS: 76136, 84136,
Max Tongue
Weight
Weight
900 lb. (408 kg)
1000 lb. (454 kg)
Printed in Mexico
CQT76136
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Cequent Performance Products, Inc. ("We",
1.
"Us" or "Our") warrants to the original consumer purchaser only ("You" or "Your") that the
product will be free from material defects in both material and workmanship, ordinary wear
and tear excepted. The Warranty is valid only if (a) the products are returned to Us for
inspection and testing; (b) Our inspection discloses to Our satisfaction that any alleged
nonconformance are material and have not been caused by misuse, neglect, wear and tear,
improper installation, unsuitable storage, improper repair, alteration, or accident; and (c) the
products were installed, maintained and used in accordance with Our instructions. THE
WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED (OTHER THAN THE WARRANTY OF TITLE AS PROVIDED BY THE
UNIFORM COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING
WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY
DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 9/2014
Sheet 1 of 18
Scan for safe
towing tip, or visit
http://www.ceque
ntgroup.com/qr-
product.aspx
76136NP
2-13-17
Rev. A

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Cequent Performance Products 76136

  • Página 1 CQT76136 LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Cequent Performance Products, Inc. ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: product will be free from material defects in both material and workmanship, ordinary wear •...
  • Página 2: Installation Instructions

    ™ Cequent Performance Products, Inc. Scan for safe Installation Instructions towing tip, or visit www.cequentgroup.com http://www.ceque 800-632-3290 PART NUMBERS: 76136, 84136, CQT76136 Technical Assistance: ntgroup.com/qr- TechnicalSupport@cequentgroup.com product.aspx Applications: Installation Time: 30 min. Years Make Models The time listed above is the average time for professional installers.
  • Página 3 Installation Instructions Fastener Kit: 76136F Attachment Hole Carriage Bolt ① Access hole Qty. (4) PART NUMBERS: 76136, 84136, CQT76136 5/8-11 x 2.00 Gr5 Spacer block ② Qty. (4) .250 x 1.12 x 3.00 Always wear SAFETY GLASSES Spacer block (U-Shaped) when installing hitch ③...
  • Página 4 1. Remove ground wire – Using a 10mm socket, remove ground wire 3a. Spacer block installation - Using masking tape, secure the U- from the inside of passenger side frame rail. Return fastener to Shaped spacer block to the inside of frame rail in the recessed vehicle owner.
  • Página 5 4b. Install fasteners continued – Attach the spacer block and carriage bolt (items 1 & 2) to the fish wire and pull fasteners inside the frame, four (4) places. NOTE: Keep fish wires attached to hardware and leave hardware inside the frame temporarily. 5.
  • Página 6 6. Ground wire – Using a 13mm socket, reattach the ground wire using Tighten all 5/8-11 Gr5 fasteners with torque wrench the M8 bolt, lock washer, and flat washer provided, see figure 1. to 150 Lb.-Ft. (203 N*m) Proper torque is needed to keep the hitch secure to the vehicle when towing. Tighten all M8 CL8.8 fasteners with torque wrench 7.
  • Página 7: Garantie À Vie Limitée

    GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Cequent Performance Products, Inc. (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES exempt de vices de matières et de fabrication, exception faite de l’usure normale.
  • Página 8: Équipement Requis

    Numérisez pour Cequent ™ Performance Products, Inc. des conseils de Instructions d’installation sécurité, ou visitez www.cequentgroup.com http://www.ceque NUMÉROS DE PIÈCES : 76136, 84136, 800-632-3290 Assistance technique : ntgroup.com/qr- TechnicalSupport@cequentgroup.com CQT76136 product.aspx Applications : Temps nécessaire à Années Marque Modèles l'installation : 30 min.
  • Página 9 Instructions d’installation Visserie : 76136F Trou de fixation Boulon de carrosserie ① Trou d'accès Qté (4) NUMÉROS DE PIÈCE : 76136, 84136, CQT76136 5/8-11 x 2.00 Gr5 Bloc espaceur ② Qté (4) Toujours porter des LUNETTES .250 x 1.12 x 3.00...
  • Página 10 1. Retirer le fil de masse – À l’aide d’une douille 10 mm, retirer le fil 3a. Pose du bloc espaceur - À l’aide de ruban-cache, coller le bloc de masse de l’intérieur du longeron côté passager. Remettre la espaceur en U sur l’intérieur du longeron dans la zone en retrait visserie au propriétaire du véhicule.
  • Página 11 4b. Poser la visserie – Attacher le bloc espaceur et le boulons de carrosserie (arts 1 et 2) avec le fil de tirage et tirer la visserie à l’intérieur du cadre, quatre (4) endroits. NOTA : Garder les fils de tirage attachés à la visserie et laisser celle-ci à l’intérieur du cadre temporairement. 5.
  • Página 12 6. Fil de masse – À l’aide d’une douille 13 mm, rattacher le fil de Serrer toute la visserie 5/8-11 Gr5 en appliquant un couple de masse à l’aide du boulon M8, de la rondelle frein et de la rondelle serrage de 150 lb-pi.
  • Página 13: Garantía Limitada De Por Vida

    CQT76136 GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Cequent Performance Products, Inc. ("nosotros", Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: "nos" o "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará...
  • Página 14: Equipo Necesario

    Carga de peso 6000 lb. (2724 kg) 900 lb. (408 kg) 10,000 lb. (4540 kg) 1000 lb. (454 kg) Distribución de peso Ilustración del enganche © 2017 Cequent Performance Products, Inc. Impreso en México Hoja 14 de 18 76136NP 2-13-17 Rev. A...
  • Página 15 Kit de fijadores: 76136F Orificio de unión Perno de carruaje Orificio de acceso ① Cant. (4) NÚMEROS DE PARTE: 76136, 84136, CQT76136 5/8-11 x 2.00 GR5 Bloque espaciador ② Cant. (4) .250 x 1.12 x 3.00 Siempre usar GAFAS DE SEGURIDAD Bloque espaciador (en U) ③...
  • Página 16 1. Retirar el cable a tierra: Con un cubo de 10 mm, retirar el cable a 3a. Instalar el bloque espaciador: Con cinta de enmascarar, fijar el tierra del interior del larguero del bastidor del lado del pasajero. bloque espaciador en U en la parte interior del larguero del bastidor Devolver el fijador al propietario del vehículo.
  • Página 17 4b. Instalar los fijadores: Unir el bloque espaciador y el perno de carruaje (piezas 1 y 2) al cable de insertar y halar los fijadores al interior del bastidor, (4) lugares. NOTA: Mantener los cables de insertar unidos a las piezas y dejarlas al interior del bastidor temporalmente. 5.
  • Página 18 Apretar todos los fijadores de 5/8-11 Gr5 con una llave de torque a 6. Cable a tierra: Con una llave de 13 mm, volver a instalar el cable a 150 Lb.-pies (203 N*M) tierra con un perno M8, arandela de seguridad y arandela plana proporcionados, ver la Figura 1.

Este manual también es adecuado para:

84136Cqt76136

Tabla de contenido