Southworth LS Serie El Manual Del Propietario página 13

Figure 7 – Labels and Precautionary Markings (straight skirt and bevel toe guard platforms)
Item Part# Location
*
1 .......... 2986306 On both sides of platform
or (use for standard platforms)
5904643 On both sides of platform
(use for platforms with handrails)
2.......... 2986737 On lower strongback between legs
3.......... 2986968 On lower strongback between legs
4.......... 2991927 On both sides of maintenance
devices, both sides of base
5.......... 2991182 On both sides of base, as close to
maintenance device as possible
*
6 .......... 5900158 On both sides of platform
7.......... 2986997 On hydraulic tank
8.......... Control decals:
2986999 (115/1/60)
5900167 (110/1/50)
Place one decal on base end plate, where the control
wire exits the base.
9.......... Power decals:
2987000 (115/1/60)
5900160 (230/1/60)
Note: If tabletop has comfort edge refer to figure 8 on the next page. Use other decals
and locations in place of the ones above with an asterisk "*" in front of their number
work
without
e
2986998 (24/1/60)
5900166 (24 VDC)
2991783 (12VDC)
5900161 (24VDC)
Item Part# Location
9 ....... 2987001 (208/3/60)
2987002 (230/3/60)
2987003 (460/3/60)
5900162 (575/3/60)
Place one decal on base end plate, where power wire
exits the base.
10 ...... . On junction box cover
10047672
*
11 ........ Capacity decals:
2998433 (500#)
2998425 (1000#)
2998434 (1500#)
2998427 (2000#)
2998435 (2500#)
2998436 (3000#)
Place decals on platform ends, two per end.
12 ...... 2921026 Machines with up limit only:
Locate on end of base.
13........ 2998365 Fasten to flow control located on
the hydraulic arrangement.
Southworth Owner's Manual -- LS Series
work
without
e
5900163 (110/1/50)
5900164 (220/1/50)
2999416 (380/3/50)
5900165 (415/3/50)
(alt: base end plate)
2998437 (3500#)
2998426 (4000#)
2998442 (5000#)
2998428 (6000#)
5900159 (Other)
.
13