Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
Remove end pads.
STEP 3
Place the corner loops of the net in the
bottom loop of the plastic clip.
STEP 5
To adjust the bar, depress the pushpins and
slide the bar in and out to the closest width.
Make sure the pins are in a locked position.
Congratulations!_
You have purchased one of the many quality Lund branded products offered by Lund International, Inc. We take the utmost
pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to
ensure that your product is top quality in terms of fit, durability, finish, and ease of installation.
45036 Rev B
Lund International, Lund Accessories Division
775 Tipton Industrial Drive, Building 2, Suite F
Lawrenceville, GA 30045
800-328-5863 Fax 800-782-5448 Visit us at lundinternational.com
2004 Lund International, Inc. All right reserved.
Lund® and the Lund® logo are trademarks of Lund International, Inc.
STEP 2
Place the plastic hooks on the end pad stud
and replace the end pads.
STEP 4
Adjust the width of the cargo bar to the inside
width of the cargo area.
STEP 6
Twist the end pads until they touch the sides
of the cargo area. Then twist the bar to
tighten. Tighten the cargo bar until the cargo
is secure. Be careful not to over tighten the
cargo bar, as it can cause damage to the
cargo area.
Page 2 of 2
Publicidad
