ARENDO 304350 Manual Del Usuario página 28

individual temperature setting (12)
(Function depending on temperature/current time mode (CURRENT TIME))
4. Initial use
Check if the product and the components are intact and if the appliance is working
properly when using it for the first time Remove the kettle and the base station
out of the packaging and connect the base to a properly installed earthed socket.
Wipe the surface of the kettle using a slightly dampened cloth. To remove any man-
ufacturing residues, fill the water container once with cold water up to the max-
imum mark before using it for the first time. Boil the water by first switching the
appliance to full operation using the "ON/OFF" button (6) (display is illuminated).
Alternatively, you can also press the arrow keys up/down directly for the "individ-
ual temperature setting (12) until the displayed temperature reaches 100°C. Then
press the "ON/OFF" button (6) at the top of the base station to start the boiling op-
eration. Discard the water after the initial boiling. Do not operate the appliance un-
attended and check it for damage and proper assembly before using it each time.
Repeat this process as needed.
This appliance is intended for domestic use and similar applications such as: In staff
kitchens in shops, offices and other business areas, in agricultural properties, by
customers in hotels, motels and other residential facilities as well as B&Bs.
28
individual time setting (13)
(Function depending on the brewing time / switch-on time mode
(START TIME))
English