Preparing The Machine - Bissell LITTLE GREEN PRO 2505 Guia Del Usuario

Assembly
Before you clean
1. Remove loose dirt and impediments
before deep cleaning.
2.
Pretreating (optional):
2a. Pretreating is recommended to
improve cleaning effectiveness for
heavily soiled carpet in high traffic
areas such as entryway and hallways.
2b. BISSELL Stain Pretreat
Spray any BISSELL Stain
Pretreat formula onto heavy traffic
areas, soiled areas or stains.
Allow to penetrate for at least 3 minutes.
Clean as normal, following the
instructions below.

Preparing the machine

1.
Release Flex Hose by twisting the
Hose Secure Latch clockwise. Unwrap
Flex Hose completely.
2.
Attach the Large Stain Tool or Tough
Stain Tool to the Hose Grip until it snaps
together. Make certain the tool is securely
attached.
3.
Twist the Quick Release™ Cord Wrap
clockwise to unwrap the power
cord completely and plug into
grounded outlet.
Filling the formula & water tank
1.
Remove tank from the back of the
machine by lifting up Tank Carry Handle.
Note: This tank was designed with a
flat bottom so it can be easily filled.
2.
Unscrew the black cap and remove
bottle insert.
3. Fill tank with hot tap water (140° F/60° C
MAX) to the water fill line. Add 60 mL/2
oz of BISSELL 2X formula to the tank.
4.
Replace the bottle insert in the tank and
tighten the black cap. Replace the tank
on the machine.
6
www.BISSELL.com
WARNING
Do not plug in your cleaner until you have completely
assembled it per the instructions and are familiar with all
instructions and operating procedures.
NOTICE
Some Berber carpets have a tendency to fuzz with
wear. Repeated strokes in the same area may
aggravate this condition.
Tip
Make only one trip to
the sink by bringing
the entire portable
cleaner. Fill and empty
in the same trip.
1.
2.