Glossary Of Terms - HYDRO-RAIN HRC 990 04 01 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONNECTING THE HRC 990 TO A VALVE
watering for a 24hr, 48hr, or 72hr period.
while dial is in the RUN position.
Press
Press
until the desired delay is
displayed.
Do not press any buttons for 3 seconds to
start the delay.
Press
to stop Rain Delay and return to
scheduled watering, or turn the dial to any
other position.
HRC 990 will operate multiple brand valves
including Hydro-Rain HRV, HRB (adapter
included),and HRJ series valves with
the use of the HRC 990 SP MD (latching
solenoid). It is also capable of actuating
Rainbird
DV, and PEB series (adapter
®
sold seperately), and can be adapted
for use with most brands 13V latching
solenoids (pigtail adapter #04024 sold
seperately).
1. Make sure the main HRC 990
10
programming pod is fully inserted into
its docking bay.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Connecting to Valve
1. Replace the existing valve solenoid.
When using Hydro-Rain™ Series;HRV,
HRJ, HRA, or Irritrol™ Series; 2500,
2700, 205, 200B, 2600, 2623DPR, or
Weathermatic™ Series; 12000, 21000CR,
N100, valve solenoid use the Hydro-
Rain™ HRC 990 12V DC Solenoid (HRC
990 SD MD (04021)). For Hydro-Rain™
Series; HRB, or Rainbird™ Series; PEB
also use adapter (04022). For Rainbird™
Series DV also use adapter (04023).
For using the HRC 990 Controller with
Rainbird™ TBOS latching solenoid, or
Hunter™ SVC latching solenoid then
use only Hydro-Rain™ Universal Pigtail
Adapter (04024).
2. Remove the plug from re the HRC
990 base unit recepticle marked "1"
(continue with #'s 2,3, and 4 when using
additional valves).
3. Insert solenoid wire connector into the
receptacle marked "1" on the HRC 990
base unit (continue with #'s 2,3, and 4

GLOSSARY OF TERMS

when using additional valves).
4. Attach HRC 990 to solenoid clip and
mount HRC 990 controller into position
by orienting and sliding the grooved
channel onto the clip.
5. Rotate dial to OFF. Wait 60 seconds to
allow the HRC 990 to close all valves.
6. Rotate dial to RUN and replace cap.
Hardware Accessories
Connecting to Accessories
Solar Power Module (04011)- Refer to
accessory manual
Rain/Freeze Module (04013)- Refer to
accessory manual
Moisture Sensor Module (04014)- Refer to
accessory manual
Solenoid Adapters
11

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

04020

Tabla de contenido