Brizo MultiChoice Virage T60030 Manual Del Propietário página 5

3
Valve Trim Installation
A.
1
Slide O-ring (1) over cartridge and the bonnet
nut (2). The O-ring, which acts as a spacer to
steady the sleeve, should rest behind the
bonnet nut.
C.
1
3
Secure the escutcheon (1) to the bracket (2) with
the 2 screws provided (3). Do not overtighten
escutcheon screws.
2
2
60 Series Installation
B.
2
If your model requires a spacer (1), install it into
sleeve (2). Slide the sleeve over the cartridge, body
and O-ring. Ensure sleeve is properly positioned
over the front of cartridge.
D.
1
3
Slide trim ring (1) over the cartridge and sleeve
and into the escutcheon. Install volume control
handle (2) with lever pointed downward to 6
o'clock position. Install set screw (3) into handle.
Push handle onto valve cartridge and tighten set
screw to secure handle.
5
1
2