Using The Tool - Craftsman professional 235.185930 Manual Del Propietário

PLACING TOOL IN SERVICE
(continued)
• Do not remove any labels. Re-
place any damaged label.
• The use of a hose whip is rec-
ommended. A coupler con-
nected directly to the air inlet in-
creases tool bulk and de-
creases tool maneuverability.
• For maximum performance, the
coupler on the wall should be
the next size larger than the
coupler used on the tool. The
coupler closest to the tool
should not be less than the
proper air supply hose size.

USING THE TOOL

• Always wear eye protection
when operating or performing
maintenance on this tool.
• Always wear hearing protection
when operating this tool.
• Keep hands, loose clothing and
long hair away from rotating
end of tool.
• Note the position of the revers-
ing button or mechanism before
operating the tool to be aware
of the direction of rotation when
operating the throttle.
• Anticipate and be alert for sud-
den changes in motion during
start–up and operation of any
power tool.
• Keep body stance balanced
and firm. Do not overreach
when operating this tool. High
reaction torques can occur at or
below the recommended air
pressure.
• Tool shaft may continue to ro-
tate briefly after throttle is re-
leased.
• Air powered tools can vibrate in
use. Vibration, repetitive mo-
tions or uncomfortable positions
may be harmful to your hands
and arms. Stop using any tool if
discomfort, tingling feeling or
pain occurs. Seek medical ad-
vice before resuming use.
• Use accessories recommended
by Craftsman.
• Use only impact sockets and
accessories. Do not use hand
(chrome) sockets or accesso-
ries.
• Impact wrenches are not torque
wrenches. Connections requir-
ing specific torque must be
checked with a torque meter af-
ter fitting with an impact
wrench.
• This tool is not designed for
working in explosive atmo-
spheres.
• This tool is not insulated against
electric shock.
NOTICE:
The use of other than
genuine Craftsman replacement
parts may result in safety hazards,
decreased tool performance, in-
creased maintenance, and may
invalidate all warranties.
Repairs should be made only by
authorized trained personnel.
5