Irritrol LIFE 4 Guida Rapida página 12

Irritrol LIFE Controller 4 _ 6 _ 8
CONTROL OPERATIONS
Manual Station Operation
Manual controller operations will override all currently active automatic operation
and sensor input. Any automatic program start time that occurs during a manual
operation will be cancelled.
Manual operation enables any stations to be given a temporary station run time
duration.Manual operation stops any running watering cycle.
1. Press the Manual Station button.
The selected station number and a Manual run time will be displayed.
Press either the or button to select the desired station number. Station
numbers go from 1 to the maximum number of stations of the LIFE Controller
model: 4, 6 or 8.
2. To manually start a station that is currently OFF (the symbol
the station is OFF), press either the
minute (0:01) to 8 hours (8:00) and press the Start/Stop
is turned on to indicate the station is ON.Note: if the maximum number of
12
is off to indicate
or button to set the run time from 1
button. The symbol
stations that can be turned ON has been reached, pressing the Start/Stop
button. The symbol is turned on to indicate the station is ON.
Note: The temporary station run time will not affect the station's run time within
any automatic program.
3. To manually stop a station that is currently ON (the symbol
the station is ON), press the Start/Stop
The symbol is turned off to indicate the station is OFF.
4. Repeat steps 2–4 for additional stations.
5. Press the Auto button when finished.
is on to indicate
button to stop the selected station.