Amibot Flex Laser Manual De Instrucciones página 31

Troubleshooting
"Cliff sensor does
not work
pls check it on
time."
"Wheels got stuck,
pls handle in time."
"Side brushes got
stuck, pls handle in
time."
"Main brush got
stuck, pls handle in
time."
"Lidar gots covered,
please handle in
time."
"Schedule success."
"Schedule cancel."
"Bumper error."
"Start cleaning"
The gap sensors are dirty. The indicator light quickly
flashes red. Clean the sensors with a dry cloth.
The wheels are blocked. The indicator light quickly flashes
red. Move the robot a few centimetres, then restart the
appliance.
The side brushes are blocked. The indicator light quickly
flashes red. Check that nothing is blocking the wheels and
restart the appliance.
The main brush is blocked. The indicator light quickly
flashes red. Check the brush and restart the appliance.
The laser is covered. The indicator light quickly flashes
red. Carefully clean dust off the laser.
Scheduled cleaning is complete. The indicator light is
steady blue.
Schedule fail or cancellation. The indicator light is steady
blue. Reset the cleaning cycle.
1. The bumper is stuck. The indicator light quickly flashes
red.
2. The bumper is covered. The indicator light quickly
flashes red.
Check that the appliance is not blocked, move it a few
centimetres and then restart the appliance.
AUTO cleaning or select the area to start cleaning. The
indicator light is steady blue.
29
EN