Troubleshooting; Tables: Malfunctions And Possible Causes - Amibot Flex Laser Manual De Instrucciones

EN

Troubleshooting

Please contact AMIBOT technical department in the following
cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.

Tables: Malfunctions and possible causes

To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
Audio messages
"Low battery,
pls recharge in
time."
"Start charging"
"Robot is power off,
Please switch
power on."
"Robot is
suspending, pls put
it on flat floor."
Description and solution
The appliance has run out of battery. The indicator light
slowly flashes red. Recharge the robot.
Plug in the home base or plug the power cable directly
into the appliance; the indicator light slowly flashes blue.
The robot is switched off, it cannot be charged. The
indicator light quickly lights up red.
Switch the robot on by pressing the ON/OFF button to
start charging.
The robot's wheels are not touching the floor. The
indicator light quickly flashes red. Put the robot on a
flat, obstacle-free surface and press the AUTO button to
resume the cycle.
28