Package Contents; Description (Fig. A); Electrical Safety - DeWalt DW961K2 Manual De Instrucciones

+40 ˚c
+4 ˚c
Charge only between 4 °C and 40 °C
Discard the battery pack with due care
for the environment
Do not incinerate the battery pack

Package contents

The package contains:
1 Cordless Driver/(Percussion) Drill
1 Battery Pack (DW996K)
2 Battery Packs (DW961K2, DW976K2, DW996K2)
1 Battery Charger
1 Metal case
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your D WALT Cordless Drill has been designed for
E
professional applications:
DW961K2 Pistol Grip Drill - drilling and screwdriving
DW976K2 Pistol Grip Percussion Drill - (percussion)
drilling and screwdriving
DW996K(2) Pistol Grip Percussion Drill - (percussion)
drilling and screwdriving
1 Variable speed switch
2 Forward/reverse slider
3 Two gear selector
4 Mode selector/Torque adjustment collar
5 Keyless chuck
6 Bit compartment
7 Pistol grip
8 Battery pack
Charger
Your D WALT 1 hour charger accepts battery packs
E
ranging from 9.6 to 14.4 V.
8 Battery pack
19
9 Release buttons
10 Charger
11 Charging indicator (red)

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
power corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double
E
insulated in accordance with EN 50144.
Mains plug replacement (U.K. & Ireland
only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
Never use a light socket.
Never connect the live (L) or neutral (N)
wires to the earth pin marked E or
E N G L I S H
.
en - 4