Tivoli Audio MODEL SUB Manual página 9

8. In the dropdown menu, select the WiFi network you will be connecting the unit to, and then enter
in your password information. Please note this must be a 2.4GHz network; 5GHz networks
are normally labeled and are not compatible with Tivoli Audio products. After entering your
WiFi network information, select "Save Speaker".
9. After you have saved your WiFi settings in the speaker, you are ready to set up a Zone. It may take
approximately 30 seconds for the speaker to connect to your WiFi network.
Note: If the set up is not complete and you receive a failed to connect message, please start over and
repeat steps 1-9.
WiFi Mode English - 8