Troubleshooting Guidance - Dragon Touch DK01 Mini Drone Manual Del Usuario

Directions
Ascend: Put your hand under the drone.
Descend: When the drone flies over an altitude of 1.2 meters, it will slowly descend
automatically.
Leftward: Put your hand to the right side of the drone.
Rightward: Put your hand to the left side of the drone.
Landing
Press the button on the remote to land the drone during the flight.
MAINTENANCE
1. Frequently clean this product with a soft clean cloth.
2. Avoid exposing this product to sunlight, heat or high temperatures.
3. Keep away from water.
4. Regularly check the plugs and other components, please repair the product
before using it if something is broken or damaged.
SAFETY GUIDANCE
1. Keep the small components away from children.
2. Please make sure the drone ascends slowly to avoid any potential damage at
high speed.
3. After landing, please turn off the remote control first, and then power off the
drone.
4. Please keep the drone a safe distance of 2-3 meters from other people to avoid
crashes or accidents during landing.
5. Children should be under the supervision of an adult when using this product.
6. Please do not charge the battery which is not rechargeable. Make sure that the
batteries are installed correctly. DO NOT use old batteries and new batteries at
the same time.
7. Users are highly recommended to power off the drone and the remotes, and
take out the batteries when they are not in use for a long time.
8. Be aware of the risk of short circuits.
17
CAUTION
1. When the battery status of the drone or remote control is low, it may affect the
remote distance.
2. If the battery status of the drone is low, it may have difficulty in maintaining
take-off or flight altitude.
3. Please stop using this product and repair it as soon as possible if something is
broken or damaged. Failure to do so could pose a safety hazard.
4. Please take out the batteries in case of battery leakage if it is not in use for a
long time.
5. Avoid falls or collisions as these will severely shorten the product life.
6. This product contains many metallic alloy parts. Please be cautious not to hurt
your fingers.

TROUBLESHOOTING GUIDANCE

1. Drone LEDs are not lighting up.
• Press the Power button on the drone.
• Replace or charge the battery of the drone.
• Make sure the connectors of the battery are firmly plugged in.
2. Drone LEDs keep flashing, but the drone is not responding to any commands
from the standard remote control.
• Pair the drone and the remote again.
• Replace or charge the battery of the drone.
• Make sure the batteries in the remote have enough power.
• Make sure to turn off the gravity sensor remote control.
3. The flight is not stable.
• Return the drone and restart to do calibration as instructed.
• Make the flight trimming accordingly.
• Fly the drone when the weather is good.
4. The response from the drone to the control is not sensitive.
• Make sure the distance between the drone and remote is effective.
18