Dragon Touch DK01 Mini Drone Manual Del Usuario página 6

2. Calibrate
Simultaneously move the left joystick to the bottom right at a 45° angle and move
the right joystick to the bottom left at a 45° angle and hold for 3 seconds to
calibrate the drone. The LED lights on the drone will blink white for about
3 seconds. The calibration is complete when the colorful LED lights turn on, and
you will hear a beep from the remote control.
3. Flight instructions
Take-off
Option 1: After finishing the pairing, push the Left joystick forward to unlock.
The four propellers will then start rotating. Push the Left joystick forward again,
the drone will take off.
Option 2: After finishing the pairing, push the Left joystick forward to unlock.
The four propellers will then start rotating. Press the One key take-off button to
take off.
7
DIRECTIONS
Left joystick
Ascend and descend: Push the Left joystick forward and the drone will ascend;
pull it backward and the drone will descend.
Rotate left and rotate right: Pull the Left joystick leftward and the drone will rotate
to the left; pull it rightward and the drone will rotate to the right.
Right joystick
Forward and backward: Push the Right joystick forward and the drone will fly
forward; pull it backward and the drone will fly backward.
8