Inside Panel
11. Install the Inside Panel Guide
NOTE: Perform this step from inside the shower.
Engage the inside panel guide into the opening of the bottom track.
Align the slots on the panel guide with the two pre-threaded screws in the inside panel bottom
frame.
Lower the panel guide slightly for clearance and tighten the screws. Do not overtighten. If the
screws are overtightened the door may not operate properly.
Move the panel back and forth along the full width of the opening and make sure it operates
smoothly.
If the panel binds, loosen the screws and lower the inside panel guide.
NOTE: If the door still does not operate smoothly, the rollers may need to be adjusted. See the steps in the
"Install the Door Panels" section.
Kohler Co.
Inside Panel Guide
15
Inside Panel Guide
1015439-2-D