Installing And Removing The Battery - Millipore NovaSeal NM0029 Manual Del Usuario

NovaSeal Battery Powered Crimping Tool User Guide
Installing and Removing the
Battery
DO NOT install the battery on the Crimping Tool until the
Crimping Tool is fully assembled and the die is installed.
1. Slide the battery into the bottom of the tool until it locks into position. The
LED will flash two times to indicate the battery is installed properly.
2. The Crimping Tool is now ready to use.
To remove the battery, press the battery lock on the Crimping Tool and slide the
battery out of the tool.
17