Pressure Washer; Product Familiarisation - Silverline 633777 Manual Del Usuario

633777
baths and taps.
Protect yourself from vibration
• Hand held power tools may produce vibration. Vibration can cause
disease. Gloves to keep the operator warm may help to maintain good
blood circulation in the fingers. Hand held tools should not be used for
long periods without a break.
Maintain your power tool
• Ensure all ventilation holes are kept clear at all times. Overheating and
fire may otherwise result.
Always Disconnect
• Before changing fittings or accessories, always ensure that your tool is
disconnected from the power source.
Switch off before connecting
• Ensure that the power tool is switched off before connecting to the power
source. If the power tool stops unexpectedly, turn the power switch to off.
Do not abuse the power cord
• Be sure your cable or extension cable is in good condition. Always have
a damaged cable or extension cable replaced at an authorised service
centre before using it. Never yank or pull the cable to disconnect it from
the power socket. Never carry your tool by its cable. Keep the cable away
from damp, heat, oil, solvents, and sharp edges.
Don't leave the tool running unattended
• Always wait until your tool has completely stopped functioning, and has
been unplugged, before leaving it.
Pressure washer safety
• Never direct the water jet at people or animals. The water jet is extremely
powerful, and can cause serious injury. Do not direct the water jet
towards the pump body, or other electrical equipment.
• Always connect a continuous flow clean water supply to the pressure
washer. Running the pressure washer dry, or with dirty water, will cause
permanent damage to the pump.
• Ensure that the water supply to the pressure washer is at a constant
pressure. If the water supply is "shared" by another appliance (e.g.
washing machine), ensure that the other appliance is switched off.
• Handle the lance with care. Do not allow the nozzle to strike the ground.
Do not allow the hoses to be twisted, crushed, or strained.
• Be aware that the lance will produce a recoil force when the pressure
washer is operated. Hold the lance securely.
• The pressure washer should always be used in an upright position.
• Do not attempt to use this machine in temperatures below 0˚C.
• Do not operate this machine in the rain. Keep all electrical connections
dry. Do not allow the machine to become wet. Never allow water to enter
ventilation holes.
• Never connect the pressure washer to a hot water supply, this will cause
the pump to malfunction and could result in permanent damage.
• Take care to prevent any hazardous materials from being washed into the
ground. Always dispose of waste responsibly. Do not attempt to pressure
wash any material suspected to contain asbestos.
633777_Manual.indd 5

Product Familiarisation

1
Nozzle
2
Lance
3
Hose Connector
4
Water Inlet
5
On/Off Switch
6
Handle
7
Trigger
8
Safety Button
9
High Pressure Outlet
10
High Pressure Hose
11
Cleaning Pin
12
Detergent Bottle
www.silverlinetools.com

Pressure Washer

20/5/10 17:33:49
5